| Author |
Message |
|
|
|
|
Post subject: 500LC Kicker
|
|
|
|
RobsLC  Daily Burner Joined: 25 Sep 2006 Total posts: 213 Location: Harlow, Essex |
I have at long last obtained a 500LC kicker & knuckle for my 4LO hybrid with 4LO engine, can anyone enlighten me as to what mods are required to attatch it to the 4LO kicker shaft.
Many thanks Rob.
|
|
|
|
Posted: Wed Apr 23, 2008 11:10 am
|
|
|
|
|
|
Post subject:
|
|
|
|
kookimonsta Rear-wheel Steering! Joined: 16 Dec 2003 Total posts: 2820 Location: Wolverhampton, West Mids, UK |
Its been covered before but you either get your 350 knuckle modded to fit the kicker or if you have the splined insert for the 500 knuckle have that welded in place and your kick start shaft tapped and a bolt to hold it all in place.
nk racing did mine.
|
|
|
|
|
Posted: Wed Apr 23, 2008 3:19 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
oldelsieboy All-gear Wheelie! Joined: 06 Jan 2004 Total posts: 1731 Location: Surrey |
| kookimonsta wrote: |
| if you have the splined insert for the 500 knuckle have that welded in place and your kick start shaft tapped and a bolt to hold it all in place. |
Local engineering firm did mine
http://img.photobucket.com/albums/v155/oldelsie/3LN%20Finished/BellyPan.jpg
OEB
|
|
|
|
|
Posted: Wed Apr 23, 2008 3:47 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
Thrasherg Powerband Master Joined: 18 May 2007 Total posts: 881 Location: Austin, Texas |
So what's the advantage of a 500 kicker on a 350?
|
|
|
|
|
Posted: Wed Apr 23, 2008 6:00 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
kookimonstaRear-wheel Steering! Joined: 16 Dec 2003 Total posts: 2820 Location: Wolverhampton, West Mids, UK |
bling
|
|
|
|
|
Posted: Wed Apr 23, 2008 6:05 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
RobsLCDaily Burner Joined: 25 Sep 2006 Total posts: 213 Location: Harlow, Essex |
| Thrasherg wrote: |
| So what's the advantage of a 500 kicker on a 350? |
Looks the "Dogs Bo Larks" & is shorter Than STD so will clear my Harris Performance "one off" billet footrests. "DEEP JOY"
|
|
|
|
|
Posted: Wed Apr 23, 2008 10:14 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
PanPowerband Master Joined: 19 Jun 2005 Total posts: 568 Location: Liverpool UK |
I can see the thread & bolt bit but what bit needs welding then?
Mark...
|
|
|
|
|
Posted: Wed Apr 23, 2008 10:28 pm
|
|
|
|
|
|
Post subject: Mods to 500 Kickstart
|
|
|
|
nvr2late Sunday Rider Joined: 11 Oct 2007 Total posts: 41 |
Nigel at NK Racing did mine too, Great Job.
|
|
|
|
|
Posted: Thu Apr 24, 2008 5:24 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
kookimonstaRear-wheel Steering! Joined: 16 Dec 2003 Total posts: 2820 Location: Wolverhampton, West Mids, UK |
| Pan wrote: |
I can see the thread & bolt bit but what bit needs welding then?
Mark... |
theres 2 parts to the 500 knuckle, the knuckle itself and a sleeved spline. the knuckle moves on the spline on the 500 so it can be moved back to clear the fairing.(i think). basicly you need to weld the sleeved spline to the knuckle itself so its both together.
tom
i'll try and do a piccy tomoz
|
|
|
|
|
Posted: Thu Apr 24, 2008 5:47 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
PanPowerband Master Joined: 19 Jun 2005 Total posts: 568 Location: Liverpool UK |
Got you now, just looked at my one and can see whats needed 
|
|
|
|
|
Posted: Thu Apr 24, 2008 9:43 pm
|
|
|
|
Options and Permissions
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
| Page 1 of 1 .:. |
|
Powered by phpBB. copyright © 2002 phpBB Group. Template design - Vereor.
