Post subject: WEMOTO Stator 31K did anybody check ?
KillerFranco
Got the Powerband!
Joined: 02 Apr 2007
Total posts: 9
Hey Folks,
I've ordered the wemoto-stator for RD350 ypvs 83/84.
The measured resistances are different from the genuine part.
I'll hope it will run. Did anybody have experiences with the wemoto part ?
Funnily enough I've also had a problem with an aftermarket stator but from electrex world.
I currently have no spark which I thought to be strange as all the parts on my project had been tested with my multimeter and on my running ypvs. I then re-tested all the components and found that the source and primary coil resistances differed by a considerable amount. I then emailed them, below is a copy of their reply;
"Hi
Check the air gap with the pickup and rotor this should be about 1mm, it can sometimes get moved in transit.
We have always made these stators the same –for about 7 years. Brown – green on oem stators is typically 140 ohms not 225.
Regards
Peter Houghton
-----Original Message-----
Sent: 17 May 2008 16:44
To: electrex@btinternet.com
Subject: Re: Stator problem
Hi
Having fitted this stator I was suprised to find that no spark was produced. Having swapped cdi's, coils and regulator with my running ypvs it led me to believe the stator was not working. So I tested source coil resistances between the red/brown and brown/green wires
The resistances stated by Yamaha for the RD350 LCII are;
I would suggest swapping the red/green wires if you cant get the bike to run. You can use an 83/84 CDI on a later stator using this mod and vice versa.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
