| Author |
Message |
|
|
|
|
Post subject: anyone got a zeeltronics package on a 31k
|
|
|
|
booboo Daily Burner |
having a few problems getting a zeeltronics package working on my 31k
anyone got one fiitted on a ypvs
i ve got a cdi unit and powervalve controller its wired up as per instructions but cant get a spark
|
|
|
|
Posted: Fri Jun 27, 2008 6:41 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
| Rich |
Is your battery ok? I've read that the system needs a good battery to work, (unlike the standard setup)
|
|
|
|
|
Posted: Fri Jun 27, 2008 8:28 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
ief  Powerband Master Joined: 27 Jan 2004 Total posts: 777 Location: netherlands |
needs 8 volt minimum if i remember correctly.
|
|
|
|
|
Posted: Fri Jun 27, 2008 8:47 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
boobooDaily Burner |
battery was replaced before we fitted the kit
|
|
|
|
|
Posted: Fri Jun 27, 2008 10:20 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
iefPowerband Master Joined: 27 Jan 2004 Total posts: 777 Location: netherlands |
i'd say contact borut, if you've done it all by the book it should work, right?
|
|
|
|
|
Posted: Fri Jun 27, 2008 11:21 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
spookyDaily Burner Joined: 23 Jun 2006 Total posts: 108 Location: antwerpen |
plug the handheld programmer in , does the LCD light up ?
|
|
|
|
|
Posted: Sat Jun 28, 2008 5:39 am
|
|
|
|
|
|
Post subject:
|
|
|
|
boobooDaily Burner |
yep the programmer lights up
i have not spark and the powervalve motor dosnt swipe when ignitions turned on
|
|
|
|
|
Posted: Sat Jun 28, 2008 7:55 am
|
|
|
|
|
|
Post subject:
|
|
|
|
zemljic_ Suburban Commuter Joined: 30 Nov 2005 Total posts: 96 |
does PPV show error?
|
|
|
|
|
Posted: Sat Jun 28, 2008 10:51 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
bryanbengal All-gear Wheelie! Joined: 03 Oct 2006 Total posts: 1988 Location: Eastwood, Essex |
have you saved a curve to a location other than 0 and then loaded it, easy mistake to make and it wont run as no curve loaded.
|
|
|
|
|
Posted: Sun Jun 29, 2008 4:07 am
|
|
|
|
|
|
Post subject:
|
|
|
|
boobooDaily Burner |
| zemljic_ wrote: |
| does PPV show error? |
i dont think so but i ll check tomorrow
and i ll check the saved curve thing to
|
|
|
|
|
Posted: Sun Jun 29, 2008 12:04 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
Vindaloobeast Rear-wheel Steering! Joined: 25 Aug 2005 Total posts: 2623 Location: Gloucester |
Important!
To avoid wrong processing, don't make unreasonable curve course.
Every time you make any changes to ignition curve, it is automatically saved to #0 position. Then you can save it to any other position number from #1 to #10.
|
|
|
|
|
Posted: Sun Jun 29, 2008 1:24 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
bryanbengalAll-gear Wheelie! Joined: 03 Oct 2006 Total posts: 1988 Location: Eastwood, Essex |
this was the problem jonney485 was having, didnt save the curve first and then load the curve.
|
|
|
|
|
Posted: Sun Jun 29, 2008 6:23 pm
|
|
|
|
Options and Permissions
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
| Page 1 of 1 .:. |
|
Powered by phpBB. copyright © 2002 phpBB Group. Template design - Vereor.
