| Author |
Message |
|
|
|
|
Post subject: PWK question
|
|
|
|
reddevil7777  Suburban Commuter Joined: 09 Jul 2004 Total posts: 95 Location: Huddersfield |
Am I right in thinking that you can use the vacuum nipple on the carb as an oil feed? Reason I ask is I've got about eight pwk28s (The joy of owning 2 KR1S and the quest for spares and doner bikes  ) and I could easily make a pair of 'right hand' ones to use on my hybrid, stick 2 long adjusters on, exiting on the right and jobs a good 'un.
Carburation still remains a bit of a black art to me, so sorry if it's a bit of a simple question 
|
|
|
|
Posted: Tue Jul 15, 2008 9:48 am
|
|
|
|
|
|
Post subject:
|
|
|
|
efftwo Daily Burner Joined: 08 Aug 2003 Total posts: 115 Location: Scotland |
The real oil injectors have an orifice think it is 1mm diameter.
|
|
|
|
|
Posted: Wed Jul 16, 2008 7:02 am
|
|
|
|
|
|
Post subject:
|
|
|
|
breastlover Regular Racer Joined: 18 Aug 2003 Total posts: 250 Location: Old Europe |
Would happily buy a pair from you
|
|
|
|
|
Posted: Wed Jul 16, 2008 12:02 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
Pan Powerband Master Joined: 19 Jun 2005 Total posts: 563 Location: Liverpool UK |
Mark, I used 2 right hand carbs out of the selection that I got from you, no problems with the oil feeds but couldn't get them to work so swapped back to 31k ones. Carbs are a mystery to me to but I'm learning and will have another go at some point.
Mark...
|
|
|
|
|
Posted: Wed Jul 16, 2008 9:34 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
BernardoDaily Burner Joined: 08 Jun 2004 Total posts: 107 Location: Donegal |
I'd have a pair as well if you can spare them
|
|
|
|
|
Posted: Wed Jul 16, 2008 10:00 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
reddevil7777Suburban Commuter Joined: 09 Jul 2004 Total posts: 95 Location: Huddersfield |
Thanks for the advice guys, will have a weigh up about getting rid of any and let you know.
Think I'll have a go, got a pair sorted and are being vapour blasted tomorrow. Ordered the 40 degree angled bits from Allens. Sorted the chokes out tonight, used KR plungers mated to an old lc choke plunger, looks pretty neat and tidy.
|
|
|
|
|
Posted: Thu Jul 17, 2008 10:11 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
reddevil7777Suburban Commuter Joined: 09 Jul 2004 Total posts: 95 Location: Huddersfield |
Quick pic of them fitted, working spot on now, was slightly rich but messing with airbox and needles sorted that out.
http://i22.photobucket.com/albums/b338/casson777/compostcorner055.jpg
Used the 40 degree bend from Allens with a std lc throttle cable, choke is from kr1s plungers mated to an lc button, works fine.
Vapour blasting by Doy of this parrish, highly recommended.
|
|
|
|
|
Posted: Thu Jul 31, 2008 7:26 pm
|
|
|
|
Options and Permissions
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
| Page 1 of 1 .:. |
|
Powered by phpBB. copyright © 2002 phpBB Group. Template design - Vereor.
