| Author |
Message |
|
|
|
|
Post subject: side stand switch
|
|
|
|
twostroke13  Sunday Rider Joined: 21 Nov 2007 Total posts: 27 |
Any one know the colors and number of wires that run to the side stand switch for an 85 RZ350. Also, will I get any spark at all if the switch is not connected?
|
|
|
|
Posted: Wed Jul 16, 2008 3:28 am
|
|
|
|
|
|
Post subject:
|
|
|
|
| p51bombay Joined: 23 Jan 2004 Total posts: 9872 |
Should be one black and one blue/yellow. If disconnected its the same as having the stand down, you have to put a jumper lead on if you take it off.
|
|
|
|
|
Posted: Wed Jul 16, 2008 4:03 am
|
|
|
|
|
|
Post subject:
|
|
|
|
twostroke13Sunday Rider Joined: 21 Nov 2007 Total posts: 27 |
thanks! any idea where the black leads into or ends up?
|
|
|
|
|
Posted: Wed Jul 16, 2008 4:51 am
|
|
|
|
|
|
Post subject:
|
|
|
|
| p51bombay Joined: 23 Jan 2004 Total posts: 9872 |
If you mean where is the plug, I don't really know on a valvie but look around the battery/airbox area - should be a two wire plastic plug with the above colours - put a jumper lead from one to the other.
|
|
|
|
|
Posted: Wed Jul 16, 2008 5:07 am
|
|
|
|
|
|
Post subject:
|
|
|
|
twostroke13Sunday Rider Joined: 21 Nov 2007 Total posts: 27 |
Yeah, that kind of the problem. I just got a very used wiring harness and missing is the plastic box that the side stand switch plugs in to. Maybe someone cut off the plastic box to twist the wires together and then over time they came up done.
|
|
|
|
|
Posted: Wed Jul 16, 2008 1:25 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
| p51bombay Joined: 23 Jan 2004 Total posts: 9872 |
What model and where are you?
|
|
|
|
|
Posted: Wed Jul 16, 2008 1:32 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
twostroke13Sunday Rider Joined: 21 Nov 2007 Total posts: 27 |
I'm in the U.S. and it's a 85 Kenny Roberts.
|
|
|
|
|
Posted: Wed Jul 16, 2008 2:21 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
twostroke13Sunday Rider Joined: 21 Nov 2007 Total posts: 27 |
ok, I found the switch wires and bridged them. still no spark. followed the blue and white wire down from the switch to another white plastic connector with the blue /white, black, sky blue, and dark blue running to it. Is this where the side stand controller connects to? If so do I need the controller or can I bridge it as well?
|
|
|
|
|
Posted: Wed Jul 16, 2008 8:00 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
twostroke13Sunday Rider Joined: 21 Nov 2007 Total posts: 27 |
http://tinypic.com/view.php?pic=2rw6n2w&s=4
|
|
|
|
|
Posted: Wed Jul 16, 2008 8:18 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
| p51bombay Joined: 23 Jan 2004 Total posts: 9872 |
OK well I was going to suggest a new harness but I doubt very much the US spec ones are available any longer. Has this been cut off the harness?
http://tinypic.com/view.php?pic=2rw6n2w&s=4
Yes, you need the controller and either a proper switch or a jumper lead for it to work. I may have a controller somewhere but you would need a new harness from the sounds of things - nothing worse the butchered wires. Try asking for one on here
|
|
|
|
|
Posted: Wed Jul 16, 2008 10:11 pm
|
|
|
|
|
|
Post subject:
|
|
|
|
twostroke13Sunday Rider Joined: 21 Nov 2007 Total posts: 27 |
Got it sparking again. Had a short in the black/ white stripe one. Will be getting a new harness though. Thanks for the help.
|
|
|
|
|
Posted: Thu Jul 17, 2008 4:53 pm
|
|
|
|
Options and Permissions
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
| Page 1 of 1 .:. |
|
Powered by phpBB. copyright © 2002 phpBB Group. Template design - Vereor.
